|Annie and Frank's Fishy Mirror|
First I had to nag and nag my husband to cut the board with his angle grinder.
Then, once that was achieved, I used a rasp to tidy the edges and then sanded them off a bit.
Painted the Bonding liquid onto the Nutec board
Glued the mirror on to the board
Played around with composition of fish and glass nuggets
and arranged the broken mirror around the fish mosaic inserts and glass drops.
Used the ready mixed white adhesive from Tylon to glue it all down
Finally once all was dry, it was ready for grouting.
Once the grout had started setting, I wiped off the excess, making sure to fill holes in the edges and smooth down any messy bits on the back edge of the mosaic. Here is the mirror, just after grouting. It still needs to be carefully cleaned, grouting touched up if necessary. Then the back of the board must be painted, and it will be complete.